The Expert Weighs in on construction contract “orders of precedence” (Guest Post)

Phil Kabza headshotThis past week, my post on the concept of contract “orders of precedence” generated a lot of comments and feedback from blog readers.  One reader, an expert in MasterSpec documents, weighed in with a weighty response that deserved a post of its own.  What follows is a Guest Post by Phil Kabza, FCSI, CCS, AIA.  Phil is a partner with SpecGuy, providing specifications and technical consulting and training to architects, engineers, and facility owners. 

Phil is a graduate of the University of Michigan College of Architecture and Urban Planning and WesternMichiganUniversity, and holds certifications as a construction specifier, contract administrator, and LEED professional. He has over 30 years experience in architectural and construction quality management and instruction. He is Past Chair of the AIA MasterSpec Architectural Review Committee, a contributor to The Construction Specifier magazine, and founding Chair of the Charlotte Building Enclosure Council. He is a Fellow of the Construction Specifications Institute and a member of Specifications Consultants in Independent Practice.

Your posting on order of precedence clauses covers a topic that is near and dear to the professional specifier’s heart. AIA contract documents and professional specifier practices maintain that order of precedence clauses are typically not called for – the drawings and specifications are a unified whole, and any conflict between or within them is subject first to interpretation by the architect/engineer, and if not resolved, is subject to resolution through the claims process.

What happened in the fuel tank replacement case you cite is the bidding subcontractor, whom we can assume to be reasonably competent and fully aware of the conflict between the two documents, sought a bid advantage by withholding their discovery of the product note conflict and by bidding the less expensive product, perceiving that the chances that they will be held to the higher product standard were low enough to take the risk of reversal of their claim.

Bidding subcontractors/suppliers are responsible for reading and interpreting a small portion of the drawings and one or two specifications sections out of the 200 or more sections on a project, the work results for which they are held to be specialists. The architect/engineer is responsible for preparing all of several hundred drawings plus the 200 or more specification sections describing work results for which they are held to be reasonably knowledgeable under their respective standards of care. So let’s keep in mind that the bidding subcontractor/supplier is in a position of superior specialty knowledge and is electing to withhold discovered information about the architect/engineer’s documents for his/her own business advantage.

To incorporate an order of precedence clause declaring that either a drawing note or a specification clause should take precedence in the contract will mean that 50 percent of the times where there are conflicts within the documents (I’m guessing the percentage), the owner will be entitled to receive a component that does not meet their design intent. The architect/engineer has either prepared or carried over a drawing note that includes erroneous information, or a specification has been written that is not coordinated with the drawing note or otherwise does not reflect the owner’s design intent in the product selection indicated by the architect/engineer.

Upon discovery of the conflict during the submittal process (assuming that it is discovered), the owner’s alternative is to negotiate for the appropriate component in a setting in which they have only one party with whom to negotiate – a contractor who is already under contract, who may have a financial interest in exploiting a delay through the negotiation, and who often has little incentive to provide the appropriate component for a reasonably adjusted price. While the order of precedence clause may make contract interpretation simple, it does nothing to ensure that the owner will obtain their design intent at a reasonable price – it just shifts the difficulty to the later price negotiation. Or worse.

What’s most troubling is the assumption that an order of precedence clause plus the normal submittal review process will protect the owner in such an instance by revealing the conflict already concealed by the bidding subcontractor. This is because the architect/engineer’s review of the contractor’s submittals takes place in a very different environment compared to the design environment in which the original product selection decision was made and the drawings and specifications were developed. Someone knew which underground fuel tank was required; was it the drafter of the drawings, or the specifier? Which should take precedence?

Submittal reviews are not as comprehensive and coordinated an architect/engineer activity as is design. Submittal reviews are not necessarily carried out by the designing architect or engineer. The purpose of submittal review is to establish basic conformance between the contractor’s submittals and the requirements of the contract documents – not to comprehensively review the content of the design documents. So the likelihood that the reviewer would miss the drawing note and your GC’s owner would receive a UL 142 underground fuel tank only to have it rejected by the authorities having jurisdiction during an onsite inspection is rather high – or worse, to have it installed and fail, resulting in an environmental calamity and giving rise to an extraordinarily expensive claim and drawn out resolution process that will cost thousands of times the difference in price between the two tanks.

It is in order to avoid such expensive experiences that the standard AIA documents place the management of the risk for the result of conflicting requirements in the contract documents in the hands of the party that they know is in the best position to perceive and handle the conflict:  the contractor whose specialist subcontractor/supplier has a high financial incentive to take note of the conflict and who can decide to handle it responsibly – or not. This is not an argument in favor of architect/engineers avoiding responsibility for their design errors; this is a case where the overriding interest of the owner and the public in achieving design intent should take precedence, because the potential for enormous loss to all parties plus their insurers is greatly reduced.

The AIA and professional specifier position that the bidding subcontractor should not withhold information but should seek interpretation during the bidding process is not unreasonable, even if it is not a popular one among contractors jostling for bidding advantage. One or two well published case precedents that uphold the contract clause requiring the contractor to provide the “more stringent requirement or expensive product” likewise would be enough to curtail the bidder practice of deliberately withholding information in order to secure a contract.

As for the specifics of the contract your party is wrestling with, a couple of well-deserved whacks on the architect/engineer’s mousing hand for placing specification information in the drawings, and for not relying on carefully prepared specifications to address this topic. Engineers are especially prone to doing this. That is one reason why two-thirds of architect’s potential claims result from their consultant’s poorly prepared documents. The Construction Specifications Institute’s maxim to “say it once, say it correctly, and say it in the proper place” is often ignored by the engineering community at their and their architect clients’ peril.

Let’s not let the owner off the hook, either. Words matter, and use of the term “more stringent” without the accompanying “or more expensive” phrase likely comes from the owner’s own custom contract and certainly gives the contractor something to hang their hat on in this dispute. It shouldn’t. The “more stringent” term is not in the AIA contract documents nor does it appear in MasterSpec, the AIA’s master specification library. (Disclosure:  We are a consultant to ARCOM, MasterSpec’s publisher and have produced several recent updates to the MasterSpec Division 01 General Requirements.)  This suggests that the owner has their own contract clauses or supplementary conditions that include the phrase “more stringent.”

Professional specifiers throughout the country decry the deplorable conditions of most public agency contracting documents, and this one is likely no exception. Case in point:  the State of North Carolina’s construction general conditions document OC-15 that intermingles the requirements for bidders and for the contractor, which apply to two different entities in two different phases of the project and should be well separated. The OC-15 also conflicts with the state’s own supplementary conditions document. The state also  dictates architect/engineer performance that conflicts with the professional standard of care. That’s not to mention the nearby city government whose general conditions consist of the 1976 AIA A201, much modified, and probably thoroughly misunderstood as well. Add to that any contract where the owner’s attorney incorporates the bidding requirements documents in the construction contract – unnecessarily providing meat for more interpretations, claims, and disputes, and fees.

It’s a wonder that anything gets built.  That it does is testimony to the many people in our industry who are determined to do good if imperfect work, build things, make a living, and stay out of court.

[Melissa here again]:  Well said, Phil.  Thanks for providing me a much better understanding of the Specifier’s position concerning “order of precedence” clauses.  The attorney in me still likes them, but I can understand your point that contractors can abuse their position by failing to inform the design team of conflicts in the documents.  I represent many such architects and engineers who have experienced such after-market bidding by contractors.  Sometimes it is difficult to know whether the contractor honestly missed the conflicts, or whether he saw it and is taking advantage of the situation.  I certainly agree that the contractor should bear some responsibility for reviewing his scope of work completely prior to submitting his bid.

Do you agree with Phil?  What is your position on the role and interplay of contract documents on the construction project?  Share your thoughts with Phil and me in the comments below.

9 thoughts on “The Expert Weighs in on construction contract “orders of precedence” (Guest Post)

  1. Barney Quinlan says:

    I’m a retired electrical estimator and several times went to court over notes on drawings and I won every case. My son is doing a job that was put out to bid a second time because the first bids ran over the budget.
    The drawings show all the Fire alarm devices and panel as did the original drawings. However there was a note added to the drawings that state: Just electrical conduit, wire and boxes to be provided for the fire alarm. The owner is insisting he provide a full workable system.
    I took the state of New York over similar wording on the Strong Hospital back in 1971 and won a $500,000.00 change order.
    Is this king of note in today’s world interpret differently. He’s just a two man company and doesn’t have deep pockets to challenge them unless I can get an honest answer which way for him to go.
    Thanks,
    Barney Quinlan

    • Melissa Dewey Brumback says:

      Hi Barney! Thanks for your comment/question. If the note on the drawings was there when your son made the bid, then he’s got some solid evidence of what his bid (and did not) include. Nothing in the law is ever “for certain” when dealing with what a jury would decide, but sounds to me like there was no “meeting of the minds” as to what the contract was to include. That would be a solid defense to providing the whole fire alarm system– it was never contemplated based on the note on the plans your son bid on.

  2. Joe GC says:

    No I do not agree.

    It is another very typical situation of the Architect and Engineer doing a poor job and then trying to seek relief of their error at the contractors expense. Phil’s comments are based on the fact that all contractors are not ethical, which is simply not true. If the subcontractor is the expert, then why are the drawings and specifications prepared by Architect’s and Engineer?

    This is exactly why Design Build delivery methods are becoming more popular by the day.
    Single source responsibility from someone who really is an expert, not someone who has a lot of education and therefore purports to be an expert.

    In other wards in laymen’s terms “If I have to verify everything you draw and specify Mr. Architect, then why do I need you in the process at all”? If you are not responsible for the review of the submittals then why do I need to send them to you? No more “approved” stamps just “reviewed” stamps, its becoming a joke!

    When will the Design Community wake up? That is why so many Architects and Engineers are now finding themselves working for contractors.

    You are responsible for the Design Mr. Architect, it is cut and dry, simple as that, not rocket science and you do not need to be AIA or P.E. to understand it.

    AIA needs to do more training, especially when it comes to spending time in the field. They need to understand what they are designing, just as the contractor needs to understand what he is building.

    They have never seen it that way because they think they are above the contractor or smarter than the contractor.

    Until they learn they are not better or smarter because of classroom education things will not be improving and the lawyers will continue to be the most successful.

  3. Rafael Davila says:

    Very convenient, errors cost but at the cost of the one who did not generated them.

    The architect is supposed to be a professional and take responsibility for his errors. If you read AIA contract it gives too much power to the architect at the expense of the other parties, he declares himself to be the supreme judge, to interpret his own inconsistencies for his benefit, AIA Contract documents are biased in favor the the one who wrote the documents and such clauses shall never be interpreted against the one who did not wrote the contract.

    You are biased in his favor, the contract is biased in his favor, all you want is their favor. If he is to interpret whatever to his favor after the fact, if he is to be the sole juror of inconsistencies then why having a contract, just write a single sentence, whatever the architect decides. If he forgot a whole building then the contractor should knew and he will absorb the full cost.

    That any inconsistency is to be solved latter on by the party that caused the inconsistency is the Mother of All Ambiguities. Is like playing a game without clear rules, better play Russian Roulette. I wonder why an errors and omissions insurance exists, do they exclude cost to the contractor?

    Down with those that cannot take responsibility for their own errors, not capable to at least place an order of precedence, let the bidder in a hurry know where is he to concentrate. Do you pretend he will find in a hurry all your errors? Do architects give bidders equal time it took them to prepare the drawings and all related contract documents time to figure out all his errors, including his consultants such as structural, mechanical, electrical and other specialties?

    I wonder if no order of precedence and architect the supreme juror will stand in court. I can understand the concept of general intent in the lack of ambiguity but if plans differ to specs the architect will decide [to his or client convenience] does not makes any sense at all. I can understand that in the lack of order of precedence specs will govern by common law.

    • Melissa Dewey Brumback says:

      Rafael–

      You make some very interesting points. There is a somewhat common belief among many that the AIA docs, because they were drafted by architects, are pro-architect. I’d argue that they are pretty balanced, as the AIA wants them to be used by all parties. However, there are other contracts such as ConsensusDOCS which are generated by a conglomeration of different interests that could also be used. I’m going to address more of your points in greater detail in an upcoming post later this week.

      • Rafael Davila says:

        Contracts that are so biased as to give so much power to Architect or anyone shall be barred via common law from public contracts where bidders do not have standing to negotiate such clauses.

  4. Andy says:

    Great information and very helpful. However, I do not think subcontractor/suppliers are consistently in a position of superior specialty knowledge and elect to withhold discovered information about the architect/engineer’s documents for his/her own business advantage. One of my pet peeves is when the architect/engineer places a note on a bidding site plan for a specific area “…sub-contractor shall reroute utilities as required to avoid new construction…”
    I have been in many heated discussions with GC’s/Architects/Engineers about these seemingly innocuous notes on the plans. This usually occurs when the “reroute” becomes a major expense due to the designs of the various divisions not being coordinated by the designer on the multiple plans. The “new construction” is a duct bank/huge footing, etc. that encroaches into the area first and then I am on the hook to avoid all of these. When I argue my point; the designer always refers to the note on the plan as if this is some kind of “get-out-of-jail-free card”. I then assert that the designer has a legal and ethical responsibility to coordinate the multiple division designs and not expect the sub to design/mitigate the issue in the field for free. To me; this is an example of the designer taking advantage of their knowledge of the project to attempt to shift added costs onto the sub. Does the Spearin Doctrine apply to situations like this?

    • MelissaBrumback says:

      Andy-
      Thanks for your comments.

      I tend to represent architects and engineers, so I am generally biased in their favor. Having said that, a general construction note, while helpful to the A/E’s position, is not exactly a true “get-out-of-jail-free card.” Designers do have a duty to coordinate their designs between divisions, and to note existing conditions, including utilities, as they are known (or could be known with due diligence) on the drawings. Their failure to plan for design conflicts and the like could be considered a Spearin issue. Again, I say “could” because it depends on the specifics of the construction project, and the contractor has a duty to investigate and note conflicts etc. too. (Plus, I hate to condemn any architect or engineer sight unseen!).

      How have you generally resolved these issues in the past? Do you just bear the expense, split the costs, or litigate? Would love to hear how you’ve resolved it on various projects.

Leave a Reply to Melissa Dewey BrumbackCancel reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.