Ski Lift Cables–Treasure, Not Trash? One Architect’s Design (news note)

Recently I was contacted by the folks at repurposedMATERIALS, who shared with me some photos featuring a unique design:  ski lift cables were installed as hand-rails for a housing project.  Check out these pictures:

ski lift cable hand rail design of architect     hand rail architectural design

According to company representatives, re-purposing has both economic and environmental benefits that far outweigh that of traditional recycling:

Re-purposing is creative re-use. It is NOT recycling that has gotten all the buzz since the 1970s.  Remember, recycling requires huge amounts of energy to melt, grind, chip, or shred a waste stream into a useable raw material to manufacture something new.  With “re-purposing”, we deal with byproducts and waste that get a second life because they have value “as is”.

Other examples of re-purposing include using used rubber roofing membranes as pond liners and retired wine barrels as re-purposed trash cans.

Have you had occasion to use re-purposed materials?  Simply think the handrails above are uber-cool?  Share in the comments section of the blog!

Solar Energy in North Carolina- an A plus! (news note)

You may be aware that back in 2007, North Carolina adopted a renewable energy portfolio standard (REPS), the first of its kind in the Southeast.

As part of the state’s commitment to clean energy and sustainability, required utilities to produce a portion of their electricity from renewable resources such as solar energy, wind, or organic waste. This portfolio standard created a new market for many North Carolina based clean energy companies. Coupled with generous corporate tax credits (30% from the federal government, 35% from the state), North Carolina has provided a fertile ground for these new businesses to grow and thrive.

north-carolina-solar-summary

 

Currently, North Carolina ranks eighth in the nation in solar photovoltaic capacity. Over 1,200 photovoltaic systems are registered with the N.C. Utilities Commission and of those registered systems, over 250 are of commercial size.

SunEnergy1 is an example of a success story in the state’s nascent solar energy industry. The company launched in 2009 with two employees. Today, it has a total workforce of 130 (including contract labor) and projected 2012 revenues of $135 million. Founder and CEO Kenny Habul had decades of experience in construction back in his native Toronto. However, green construction and was only an auxiliary part of his business. The recession prompted Habul to turn them into the core of his business. The incentives provided by the state encouraged him to grow his new business here.

This short (1.11) video is a cool time-lapse footage of a SunEnergy1 2.5 MW solar system installation in Plymouth, NC. The project took 17 days and required four Schneider Electric GT-500 inverters and 9,800 Bosch 245-watt solar panels. The system produces enough energy to power over 300 homes.

According to Kabul, North Carolina could provide even more incentives to grow the solar energy industry. One controversial suggestion would be to allow companies such as SunEnergy1 to sell electricity directly to consumers rather than use public utilities as middlemen. Current law mandates that only utilities may sell power to consumers.

Even without direct sales of solar energy, NC is still a leader in the solar movement.

Between the federal solar tax credit, the state solar tax credit, and energy bill savings, North Carolina, according to SolarPowerRocks.com, has one of the shortest payback timeframes “worthy of an “A” in everyone’s book”.  You can’t beat that testimonial!

Thoughts, comments, or questions?  Do you think your clients are ready for solar power?  Share your experiences in the comment section, below.

Video courtesy SunEnergy1.  NC Solar Summary chart courtesy SolarPowerRocks.com

AIA Triangle Home Tour (this Saturday!) (Tue Tip)

AIA Triangle House TourThis Saturday, make plans to attend the annual Triangle Tour of Residential Architecture. This year’s tour showcases award-winning, architect-designed homes throughout the North Carolina Triangle region.
  
What:  AIA Triangle Home Tour
When:  October 6th, 2012 (this Saturday)
 
   
Featured residences including homes by the following Firms:
Will you go?  Even if you cannot tour, check out the photos and details of the homes on the AIA Triangle Home Tour website.  And congrats to the participating, award-winning Firms.

2012 Construction Jobs That Are in High Demand (guest post) (Tue Tip)

Today’s guest post is by Derek Singleton, ERP Analyst with Software Advice, a website that reviews construction software. 
 

The construction industry is undergoing a change–several states are showing positive signs of job growth. A June report released by the Associated General Contractors of America (AGC) indicates found that 20 states added new construction jobs. The catch, however, is the jobs that are available require highly skilled individuals. 

 

The chart above aggregates survey data of the top five anticipated engineering and skilled labor shortages from 2,223 construction industry professionals. As you can see, engineers of all types are expected to remain in high demand.To find out what’s driving job gains in the industry, I recently caught up with AGC’s Chief Economist, Ken Simonson. In my conversation with Simonson, he highlighted three key drivers to the current trends in construction employment.

  1. Low vacancy rates are spurring investment in apartment complex construction.
  2. The acceleration of natural gas extraction is fueling related construction job growth.
  3. Manufacturing investment is leading to new manufacturing facility construction.

So what kinds of jobs fit well with these market drivers? Below I’ll profile a few relevant professions that are currently in demand.

Apartment Complex Construction
Apartment construction requires nearly every kind of construction trade on the job. However, there are a few particular positions that are particularly high demand.

Architects: Efficiently building an apartment complex starts at the design process. With new apartment construction increasing, architects familiar with designing multi-family residences will be in high demand.

Carpenter: Naturally, carpenters are in high demand as more complexes are built they’re needed for everything from framing to setting crown molding.

Millwork: The millwork trade is in high demand to produce the doors, crown moldings, window casings, etc. needed to finish an apartment.

Electrician: Electricians that are familiar with multi-family electrical wiring are know how to run standard power distribution to lighting and other outlets in apartments.

Natural Gas Extraction
The growth in natural gas extraction from underground shales is also supporting new construction jobs. The majority of these jobs involve heavy construction or civil engineering.

Plumbing Engineering: Natural gas extraction is complex process that involves a lot of fluid dynamics. For this reason, drilling sites typically need a plumbing engineer to help figure out how to manage the hydraulics needed to extract gas from thousands of miles below the Earth’s surface.

Civil Engineering: Of course, effectively planning these roadways requires civil engineers that can effectively plan the infrastructure of these projects.

Manufacturing Facilities
Construction jobs are also being supported by the uptick in domestic manufacturing, which is prompting manufacturers to build new facilities in the U.S. As a result, there are two main professions that are in high demand.

Structural Engineering: Structural engineers are needed both for apartment construction and for manufacturing facility construction. These engineers need to be able to check facilities to ensure that buildings are up to code, and help amend design plans as construction is underway.

Iron work: Iron work professionals are needed to put together the large steel frames that facilities require. Within the iron work profession, welders are among the most in demand professions as certified welders are hard to find given that it can take several years to achieve certification. /

Electrician: Commercial electricians are needed when constructing a new manufacturing facility because of the need to install power and controls to motors and HVAC systems at the facility–in addition to run power distribution directly from the electrical grid.

Thanks, Derek, for your post.  Please comment below, or check out Derek’s map of construction employment by state and comment there. 

And, be sure to pick up your copy of “7 Critical Mistakes that Engineers & Architects make During Project Negotiation and Execution that Sabotage their Projects & Invite Litigation” by signing up for email updates on blog posts or by sending me an email at mbrumback at rl-law dot com.

Research Produces New Standards for Construction (guest post)(& more)

Welcome Back!  The “regular season” of Construction Law in NC blog posts has now officially started.

Recently, I had the privilege of writing on the subject of Private, Single Panel Arbitration on Chris Hill’s blog.  Please read the article if haven’t already. 

The first issue of my brand-spanking new newsletter, The Construction Professional, went out yesterday to those on the email list.  If you want to be one of the cool kids, be sure to sign up now by visiting the right hand side of the blog.  (Or, you can simply shoot me an email at mbrumback at rl-law dot com).

Finally, today’s post is a guest post by Susan Wells.  Susan is a freelance blogger who enjoys writing about automotive and health news, technology, lifestyle and personal finance. She often researches and writes about automobile, property and health insurance, helping consumers find free insurance quotes, and the best protection available. Susan and I welcome your thoughts and comments on this article.

—————————————

The Insurance Institute for Business and Home Safety (IBHS) sits on a 90-acre parcel of land in South Carolina. The research facility is dedicated to advancing building science by evaluating various residential and commercial construction materials and systems.

In layman’s terms, IBHS builds things and then attempts to destroy them by recreating conditions of natural disasters. In a studio-like production, the laboratory builds houses and then submits them to fire, wind, ice and water damage.

The IBHS research center even has a few videos on YouTube that demonstrate the effects of wind damage and fire.

two houses compared in wind damage situation

This destruction is an integral part of the construction industry as insurers work to identify risks and mitigate them through improved materials and structures. IBHS President Julie Rochman explains that the research center allows them to produce controlled experiments that are not being conducted anywhere else in the world. No longer forced to rely on case studies or opinions, the IBHS can record its findings and actively search for (and test) stronger systems.

Engineer Scott Sundberg explains the value of the research center in a single sentence, saying, “One test is worth a thousand expert opinions.”

To those at the IBHC, the information produced by these experiments is essential to advancing a sustainable community. Using hard data and conclusive evidence, such large-scale and detail oriented research allows the insurance and construction markets to focus on effective mitigation techniques. The average consumer will also have more access to product knowledge and has the potential to become more informed about products and strategies that can make their homes and buildings safer.

“Predictability and reliability of building materials and information is extremely important to the sustainability of the community, “says Mississippi Housing Director Gerald Bessey.

“Collectively as we apply these to public policy decisions and as the market place makes market choices. I think the market will react to good information that’s reliable and stable.”

In insurance underwriting laboratories like IBHS, disaster resistant and energy efficient technologies are merging to produce a new definition of sustainability.

Admittedly, there are few market standards for “green” products, and the FTC is actively working to mitigate the damage caused by “greenwashed” products that touted false claims of durability and environmental benefit. For uninformed consumers and construction managers, the wrong green system could put building structure at risk.

Some elements, such as vegetative roofs, can actually serve as fuel for fires or pose a threat under high winds. The IBHS proposes that energy efficiency and structural durability can work in tandem to create a truly sustainable product: one that will be environmentally friendly yet resilient in the face of environmental disasters.

One such recommendation is retrofitting older homes. Owners can replace windows and doors with energy efficient and wind resistant materials and seal energy leaks. Simple weatherization steps can actually help the average homeowner reach a new level of sustainability without rebuilding their home using entirely new green technology.

Interestingly, there are green insurance policies that allow policy holders to rebuild after a disaster using green upgrades. This would allow for recycling of debris, LEED certification as well as coverage for new appliances.

Most insurance policies do not currently consider products like wind-resistant glass to be a green upgrade, but as research begins to define standards of sustainability, it’s only a matter of time before green technologies and resistant materials merge to produce the highest standards of construction.

Thoughts? Comments? Questions?  Drop me an email or leave your musings below.